FCS-1030 IP Camera Configuration Guide

*Note 1: Make sure just LAN connection is available and disable all others Network Connection. Eg. Wireless Connection.
*Note 2: Make sure IP cam is connected to the "Available LAN connection". (It will show "Limited or no connectivity")

STEP 1: Put CD into CD/DVD ROM and Install IP cam "Installation Wizard".



STEP 2: Open "Installation Wizard" at the desktop, and it will pop up a Installation Wizard window.
STEP 3: Select the "List Item" and Click "Manual Setup".


STEP 4: You can set the password of "root" user and Click "Next".


STEP 5: Click "No" and Untick "Get IP by DHCP Server Automatically", then Key in IP address, Subnet mask, Default gateway for your network, then Click "Next".


STEP 6: Click "Apply" to save the setting and the IP cam should be ready to use.

*The IP cam will auto assign an IP address since it cannot detect the default gateway device. Once the Ip cam is connected to the newtork with correct Default Gateway, the IP address of the IP cam will be change to fixed IP address.
* If you need any further assistance on the above kindly call your dealer or email your enquiry to support@ivenue.com.my